polypropylene pearl films tensile testing machine manufacturer from China jinan bangke testing machine co.,ltd

polypropylene pearl films tensile testing machine

Payment Terms:	T/T,L/C,WU,Paypal
Place of Origin:	Shandong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Power: Electronic

Usage: Tensile Testing Machine

this polypropylene pearl films tensile testing machine is to measure tensile strength and elongation at break of polypropylene pearl films( films of s

1.brief introduction

this polypropylene pearl films tensile testing machine is to measure tensile strength and elongation at break of polypropylene pearl films( films of single surface heat and both surfaces heat, films of non-heat).

2.sample

Mateials of polypropylene pearl films include main material polypropylene resin and a certain amount of pearl materbatch. By the biaxial orientation tensile with method of membrane, so the polypropylene pearl films is made. When measuring its tensile strength and elongation at break, a sample with size 150X15mm±0.1mm should be taken from the whole film and then load tensile force to the sample with a speed of 250mm/min±10mm/min.

3.technical specification of testing machine

1	Model	WTD-W1/W2/W5
2	Max. capacity	1000N/2000N/5000N
3	Grade	Grade 1
4	Measuring range	1%-100%FS
5	Relative error of indicating value	±1%
6	Force resolution	1/±300000FS
7	Displacement measuring range	0.2%-100%
8	Load speed range	0.005%-5%FS/s
9	Load speed precision	When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5%
10	Deformation speed range	0.005-5%FS/s
11	Deformation speed precision	When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5%
12	Displacement speed range	0.001-500mm/min
13	Displacement speed precision	Within ±0.2% of set value
14	Range of constant load control, constant deformation control, constant displacement control	0.5%-100%FS
15	Precision of constant load control, constant deformation control, constant displacement control	When set value is more than 10%FS, precision is within ±0.5% of set value When set value is less than 10%FS, precision if within ±1% of set value
16	Stroke of crossbeam	1000mm
17	Voltage	220V±10%,50Hz(should connect to the ground)
18	Power	400W
19	Dim. Of load frame	415X415X1650mm
20	Over weight of product	150kg