Overlaid wood-based panel peeling testing machine manufacturer from China jinan bangke testing machine co.,ltd

Overlaid wood-based panel peeling testing machine

Payment Terms:	T/T,L/C,WU,Paypal
Place of Origin:	Shandong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Means of Transport: Ocean,Land,Air

Usage: Tensile Testing Machine

Power: Electronic

Brand Name: wangtebei

This testing machine is to measure the peeling force of the PVC film layer on wood-based panel.

1. Introdution

This testing machine is to measure the peeling force of the PVC film layer on wood-based panel.

2. Test

Wood-based panel test sample size: 100mm X 25mm (length X Width)

Wood-based panle test sample preparing: slot at the 10mm position on one side of the wood-based panel test sample. Depth of slot should be to the joint of wood-based panel and PVC film. See the picture below:

Test procedure: peel the PVC film for a certain length and then fix the test sample into the test clamps tightly on the test machine. Then pull the wood-based panel test piece with the testing machine and software of testing machine will record the max. Peeling force.

Overlaid wood-based panel peeling test diagram:

3. Technical parameters of testing machine

1	Model	WTD-W1/W2/W5
2	Max. capacity	1000N/2000N/5000N
3	Grade	Grade 1
4	Measuring range	1%-100%FS
5	Relative error of indicating value	±1%
6	Force resolution	1/±300000FS
7	Displacement measuring range	0.2%-100%
8	Load speed range	0.005%-5%FS/s
9	Load speed precision	When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5%
10	Deformation speed range	0.005-5%FS/s
11	Deformation speed precision	When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5%
12	Displacement speed range	0.001-500mm/min
13	Displacement speed precision	Within ±0.2% of set value
14	Range of constant load control, constant deformation control, constant displacement control	0.5%-100%FS
15	Precision of constant load control, constant deformation control, constant displacement control	When set value is more than 10%FS, precision is within ±0.5% of set value When set value is less than 10%FS, precision if within ±1% of set value
16	Stroke of crossbeam	1000mm
17	Voltage	220V±10%,50Hz(should connect to the ground)
18	Power	400W
19	Dim. Of load frame	415X415X1650mm
20	Over weight of product	150kg